Exact Reproduction of 1968½ Shelby GT500KR & 1968½ 428 Cobra Jet Mustang Starter Delay.  Click on picture or above link for more details.

$1,485.00

Concours exact reproduction of the dual exhaust used on 1970 Boss 429, Boss 302, and CJ/SCJ Mustangs with dual exhaust. Click on picture or above link for more details.

$2,555.00

No Price

Concours exact reproduction of the dual exhaust used on 1965 and 1966 Shelbys and Mustangs with A- and K-code engine.  Click on picture or above link for more details.

$2,625.00

Concours exact reproduction of the dual exhaust tips used on 1965 and 1966 Shelbys and Mustangs with A- and K-code engine (non-GT).  Click on picture or above link for more details.

$85.00

Concours Correct Reproduction of the H-Pipe used on 1968½ Shelby GT500KRs and 1968½ Mustangs, 1969/1970 Shelby GT-500s (CJ/SCJ), and 1969 Mustangs/Mach I with CJ/SCJ engines.  Price is for one H-Pipe.  Click on picture or above link for more details.

$465.00

Concours Correct Reproduction of the H-Pipe used on 1967/1968 Shelby GT-500 w/428 P.I. engines and 1967/1968 Mustang with 390 GT & dual exhaust.  Price is for one H-Pipe.  Click on picture or above link for more details.

$465.00

Concours Correct Reproduction of the H-Pipe used on 1969 & 1970 Boss 429 Mustangs.  Price is for one H-Pipe.  Click on picture or above link for more details.

$475.00

Concours Correct Reproduction of the H-Pipe used on 1969 & 1970 Boss 302 Mustangs.  Price is for one H-Pipe.  Click on picture or above link for more details.

$555.00

Concours Correct Reproduction of the H-Pipe used on 1969/1970 Shelby GT-350 Mustangs & 1969 Mustangs with 351 Windsor engines and dual exhaust.  Price is for one H-Pipe.  Click on picture or above link for more details.

$485.00

Concours Correct Reproduction of the H-Pipe used on 1967 Shelby GT-350 and Mustangs with 289 K-code engines & dual exhaust.  Price is for one H-Pipe.  Click on picture or above link for more details.

$465.00

Concours Correct Reproduction of the H-Pipe used on 1968 Shelby GT-350 and Mustangs with 302 J-code engines & dual exhaust.  Price is for one H-Pipe.  Click on picture or above link for more details.

$465.00

Concours correct H-pipe for 1970 CJ/SCJ Mustangs without the spacer on the passenger-side exhaust manifold.  Guaranteed to fit just like the originals.  100% accurate bends with all factory flats and stop tabs.  Correct cross-over tube and flanges. Click on picture or above link for more details.

$465.00

100% accurate reproduction of the H-pipe used on 1965 & 1966 Mustangs with 289 HiPoengines (K-Code) and dual exhaust. 100% accurate bends with all factory flats and tabs. Click on picture or above link for more details. 

$465.00

Concours Correct 1966 Shelby GT-350 H-pipe. Exactly like the original H-pipes used in production.  Click on picture or above link for more details.

$390.00

2-1/8 inch inside diameter cast steel gasket used to seal the exhaust gases between the exhaust manifolds and H-pipe.  Click on picture or above link for more details. 

$12.00

Two-inch inside diameter fiber gasket used to seal the exhaust gases between the exhaust manifolds and H-pipe.  Click on picture or above link for more details.

$6.00

100% Perfect Reproduction of Intermediate/Resonator Pipes used on 1969 Mustangs with 428 Cobra Jet & Super Cobra Jet Engines (including Mach I), 1969/1970 Shelby GT-500s with 428 Cobra Jet & Super Cobra Jet Engines, 1969 Boss 302s, and 1969 Boss 429s.  Price is for One Pair of Pipes (one left and one right, enough for one car).  Click on picture or above link for more details.

$1,145.00

100% Perfect Reproduction of Intermediate/Resonator Pipes used on 1968½ Mustangs and Shelbys with 2.25-inch exhaust.  Concours correct for 1968½ Shelby GT500KR and 1968½ Mustangs with 428 Cobra Jet Engines.  Price is for One Pair of Pipes (one left and one right, enough for one car).  Click on picture or above link for more details.

$1,250.00

100% Perfect Reproduction of Intermediate/Resonator Pipes used on 1967/1968 Mustangs and Shelbys with 2-inch exhaust.  Concours correct for 1967 Mustang GT w/289, 1967 Mustang GT w/390, 1967 Shelby GT-350, 1967 Shelby GT-500, 1968 Mustang GT w/302, 1968 Mustang GT w/390, 1968 Shelby GT-350, and 1968 Shelby GT-500.  Price is for One Pair of Pipes (one left and one right, enough for one car).  Click on picture or above link for more details.

$1,145.00

100% Perfect Reproduction of Intermediate/Resonator Pipes used on 1969/1970 Shelby GT-350s and Mustangs with 351 Windsor engines and dual exhaust.  Price is for One Pair of Pipes (one left and one right, enough for one car).  Click on picture or above link for more details.

$1,275.00

Intented head hex bolt used to attach the resonator bracket to the hanging bracket.  Click on picture or above link for more details.

$3.00

100% Perfect Reproduction of Transverse Muffler used on All 1968½ Mustangs.  Price is for One Muffler (enough for one car).  Click on picture or above link for more details.

$675.00

100% Perfect Reproduction of Transverse Muffler used on 1969 Mustangs & Shelbys with 428 CJ/SCJ and all 1969 Boss 429s and Boss 302s.  Price is for One Muffler (enough for one car).  Click on picture or above link for more details.

$675.00

100% Perfect Reproduction of Transverse Muffler used on 1967 Mustangs & Shelbys with 2-inch Dual-Exhaust.  Price is for One Muffler (enough for one car).  Click on picture or above link for more details.

$675.00

100% Perfect Reproduction of Transverse Muffler used on 1968 Mustangs & Shelbys with 2-inch Dual-Exhaust.  Price is for One Muffler (enough for one car).  Click on picture or above link for more details.

$675.00

100% Perfect Reproduction of Transverse Muffler used on 1969 Mustangs & Shelby GT-350s with 2-inch Dual-Exhaust. Price is for One Muffler (enough for one car). Click on picture or above link for more details.

$675.00

100% Perfect Reproduction of Tailpipes used on All 1968½ Mustangs.  Price is for One Pair of Tailpipes (one left and one right).  Click on picture or above link for more details.

$545.00

100% Perfect Reproduction of Tailpipes used on 1969 Mustang GT with 428 Cobra Jet & Super Cobra Jet Engines, and 1969 Mustang Mach I with 428 Cobra Jet & Super Cobra Jet Engines.  Price is for One Pair of Tailpipes (one left and one right).  Click on picture or above link for more details.

$545.00

100% Perfect Reproduction of Tailpipes used on all 1969 Boss 429, 1969 Boss 302, and 1969 Non-GT Cobra Jet & Super Cobra Jet  Mustangs.  Price is for One Pair of Tailpipes (one left and one right).  Click on picture or above link for more details.

$395.00

100% Perfect Reproduction of Tailpipes used on All 1969/1970 Shelby GT-500s.  Price is for One Pair of Tailpipes (one left and one right).  Click on picture or above link for more details.

$365.00

Correct Reproduction of Tailpipes used on All 1969/1970 Shelby GT-350s.  Price is for One Pair of Tailpipes (one left and one right) and Two Adapters (one left and one right).  Click on picture or above link for more details.

$335.00

Concours correct reproduction of the tailpipes used on 1967 and 1968 Shelby GT350 & GT-500 (excludes KR), and 1967/68/69 Mustangs and Mach I with 2-inch dual exhaust (excludes CJ/SCJ).  Click on picture or above link for more details. 

$285.00

100% Perfect Reproduction of the Exhaust Tip used on 1968 Shelby GT-500s and GT-350s.  Price is for One Pair.  Click on picture or above link for more details.

$425.00

100% Perfect Reproduction of the One-Piece Exhaust Tip used on 1967 Shelby GT-500s and GT-350s.  Price is for One Pair.  Click on picture or above link for more details.

$375.00

100% Perfect Reproduction of the Two-Piece Welded Exhaust Tip used on 1967 Shelby GT-500s and GT-350s.  Price is for One Pair.  Click on picture or above link for more details.

$375.00

Concours Correct 1967 & 1969  transverse muffler exhaust clamp.  Exact reproduction of the original  saddle clamps used on Mustangs and Shelbys with 2-inch exhaust.  Click on picture or above link for more details.

$14.00

Concours Correct 1968½ & 1969  transverse muffler exhaust clamp.  Exact reproduction of the original tall-shoulder, saddle clamps.  Price is for one clamp (4-req for each muffler).  Click on picture or above link for more details.

$14.00

Concours Correct 1968½ & 1969  H-pipe exhaust clamp.  Exact reproduction of the original tall-shoulder, saddle clamps.  Price is for one clamp (2-req for each H-pipe).  Click on picture or above link for more details.

$14.00

Concours Correct reproduction of the tailpipe clamp used on all Mustangs, Shelbys, and Boss with 2.25-inch exhaust.  Price is for one clamp (2-req to do one car).  Click on picture or above link for more details.

$19.00

Concours Correct reproduction of the tailpipe clamp used on all Mustangs with 2-inch exhaust. Price is for one clamp (2-req to do one car). Click on picture or above link for more details.

$19.00

Concours Correct reproduction of the tailpipe clamp used on 1967 Shelbys with 2-inch exhaust. Price is for one clamp (2-req to do one car). Click on picture or above link for more details.

$25.00

Concours Correct 1967/1968/1969 tailpipe/tip horseshoe exhaust clamp.  Exact reproduction of the original clamp used to secure the Shelby or Mustang tips to the tailpipes.  Price is for one clamp (2-req per car).  Click on picture or above link for more details.

$14.00

Concours exact reproduction of the exhaust hanger insulator used on 1965 - 1969 Shelbys, Boss 429s, Boss 302s, Mach 1s, and Mustangs with dual-exhaust. Click on picture or above link for more details.

$35.00

Concours exact reproduction of the tailpipe exhaust hanger used on Shelbys, Boss 429s, Boss 302s, Mach 1s, and Mustangs with dual-exhaust.  Click on picture or above link for more details.

$35.00

Concours exact reproduction of the stainless capped lug nut used on 1969 Boss 429s.  Price is for 20-lug nuts, enough for one car.  Click on picture or above link for more details.

$415.00

100% perfect reproduction of the front sway bar bracket used on 1967 - 1970 Shelby, Boss, and Mustang with competition suspension option.  Click on picture or above link for more details.

$75.00

100% perfect reproduction of the front sway bar brackets used on 1969 and 1970 Boss 429 Mustangs.  Click on picture or above link for more details.

$85.00

Exact Reproduction of Dynamite Sticks that came on Every G.T.-500, G.T.-350, and GT500KR Shelby Mustang.  Price is for One Pair of Dynamite Sticks (enough for one car).  Click on picture or above link for more details.

$295.00

Concours Correct 1969 Boss 429, 1969 Boss 302, and 1969/1970 Shelby tie rod end boot for original Ford tie rods.  Price is for one boot (4-req to do one car).  Click on picture or above link for more details.

$24.95

Concours Correct 1967/1968/1969 Mustang and Shelby tie rod end boot for original Ford tie rods.  Price is for one boot (4-req to do one car).  Click on picture or above link for more details.

$19.95

Exact Reproduction of Floor Pan Plugs used in all 1967 and 1968 Shelby and Mustang Convertibles.  Price is for one pair (enough for one car).  Click on picture or above link for more details.

$135.00

100% Perfect Reproduction of the Spare Wheel Mounting Bolts used on 1968 - 1970 Mustangs, Shelbys, and Boss 302/429s.  Price is for One Mounting Bolt (enough for one car).  Click on picture or above link for more details.

No Price

100% perfect reproduction of the spare wheel hold down plate used on 1968 Mustangs with styled steel wheels.  Reproduced from documented original parts and confirmed using original Ford factory engineering drawings.  A part rarely seen and never reproduced until now.  Click on picture or above link for more details.

$23.00

100% perfect reproduction of the tilt column pin used on 1968/1969 Shelbys and Mustangs with Tilt-A-Way column option.  Click on picture or above link for more details.

$25.00

Do-It-Yourselfer Starter Delay Parts Package.  Includes Lead Wire, Cap Screws, and Lid Gasket.  Click on picture or above link for more details.

$50.00

Everything You Need to "Correctly" Install One Pair of Dynamite Sticks (enough for one car).  Click on picture or above link for more details.

$25.00

Concours perfect reproduction of the wiring clip used to secure the front parking light and side marker light wiring on all 1968 and 1969 Mustangs (inc 68 Shelby & Boss 429/302).  Price is for one clip.  Click on picture or above link for more details.

$20.00

Concours perfect reproduction of the wiring clip used to secure the front parking light wiring on all 1968 Mustangs amd Shelbys.  Price is for one clip.  Click on picture or above link for more details.

$25.00

Concours exact reproduction of the unique plastic shield used on all 1968 Shelbys (GT-350, GT-500, and GT500KR) and 1968 Mustangs with air conditioning.    Price is for one pair.  Click on picture or above link for more details.

$50.00

Concours perfect reproduction of the console weatherstripping used on all 1968 Shelbys (GT-350, GT-500, and GT500KR).    Price is for one piece of weatherstripping.  Click on picture or above link for more details.

$35.00